文摘

结构健康监测(SHM)在许多领域已经达到了一个高度重视土木和机械工程。有前途的损伤检测方法如损伤指数方法,有缺口的平滑技术和模态应变能方法需要结构的模式形状[1]。长期在现实生活结构模态数据采集需要计算高效的系统基于测量方法,可以很容易地安装。系统采用随机减量法(RDM)是由分散的智能加速度传感器网络申请,引发和纯测量。他们允许减少布线和计算成本降到最低。为了有效地设计一个RDM测量网络,一个批准过程定义硬件以及测量设置是必需的。此外,最优传感器位置必须被定义。然而,今天的决定主要是基于专家的知识。本文系统和分析过程定义和测量的硬件需求设置以及最优传感器位置。提出了常规使用的结果的实验模态分析(EMA)。由于对触发不同的需求和non-triggering传感器网络的结合使用两种方法对传感器的位置,以找到最好的计量点的分布结构。 A controllability based technique is used for placing triggering sensors, whereas the Effective Independence (EI) is utilized for the placement of non-triggering sensors.The combination of these two techniques selects the best set of measuring points for a given number of sensors out of all possible sensor positions.Damage detection itself is not considered within the scope of this paper.