k-ε turbulence modeling. The full approximation storage multigrid method and preconditioning were implemented as iterative convergence-acceleration techniques. An implicit dual-time stepping method was incorporated in order to simulate the unsteady flow fields. The objective function was defined as minimization of total pressure loss and maximization of lift, while the mass flow rate was fixed during the optimization. The design variables were several geometric parameters characterizing airfoil leading edge, camber, stagger angle, and inter-row spacing. The genetic algorithm was used as an optimizer, and the penalty method was introduced for combining the constraints with the objective function. Each individual's objective function was computed simultaneously by using a 32-processor distributedmemory computer. The optimization results indicated that only minor improvements are possible in unsteady rotor/stator aerodynamics by varying these geometric parameters."> 与不稳定转子级联形状优化使用隐式传递醒来的双重时间步进和遗传算法 - raybet雷竞app,雷竞技官网下载,雷电竞下载苹果

旋转机械的国际期刊

PDF
旋转机械的国际期刊/2003年/文章

开放获取

体积 9 |文章的ID 673785年 | https://doi.org/10.1155/S1023621X03000332

恩Seok李,乔治·s . Dulikravich布莱恩·h·丹尼斯, 与不稳定转子级联形状优化使用隐式传递醒来的双重时间步进和遗传算法”,旋转机械的国际期刊, 卷。9, 文章的ID673785年, 9 页面, 2003年 https://doi.org/10.1155/S1023621X03000332

与不稳定转子级联形状优化使用隐式传递醒来的双重时间步进和遗传算法

文摘

不稳定的轴向涡轮转子cascade-shape优化通过唤醒了获得一个改进空气动力性能使用非定常流,Reynolds-averaged n - s方程是基于显式解算器,有限差分;龙格-库塔多级时间行进;和交替方向隐格式对角化的。利用Baldwin-Lomax代数和的代码 k - - - - - - ε 湍流模型。完整的近似存储多栅的方法和预处理作为迭代convergence-acceleration技术实现。一个隐式双重时间步进方法成立为了模拟非定常流场。目标函数定义为总压力损失的最小化和最大化的提升,而在优化质量流率是固定的。设计变量的几个几何参数描述机翼前缘,外倾,错开角度,行间间距。遗传算法作为优化器,介绍了刑罚方法结合的约束与目标函数。同时每个目标函数的计算通过使用32核distributedmemory电脑。优化结果表明,只有小在不稳定转子/定子空气动力学改进可能通过改变这些几何参数。

版权©2003 Hindawi出版公司。这是一个开放的分布式下文章知识共享归属许可,它允许无限制的使用、分配和复制在任何媒介,提供最初的工作是正确引用。


更多相关文章

对本文没有相关内容可用。
PDF 下载引用 引用
订单打印副本订单
的观点175年
下载806年
引用

文章奖:2020年杰出的研究贡献,选择由我们的首席编辑。获奖的文章阅读