TY -的A2 -史,Guolong盟——赵,忆南向盟,壮族,以北盟——你们之浩盟——钱、倪志亮AU -彭,方PY - 2021 DA - 2021/09/30 TI -模拟稳态温升的电热领域无线传感器电路故障电流触发SP - 8359504六世- 2021 AB -本文分析无线传感器电路的结构,考虑功耗的平衡,整合、区域,噪音,等等,并采用射频无线传感器电路具有低若结构。通过分析和比较传统的模拟电流触发和数字电流触发结构、前馈的电流触发选择结构,这是由接收信号强度指示(RSSI)和可变增益放大器(VGA),实现了低功耗,快速稳定时间和宽动态范围的设计。接收到的信号强度指示器采用近似对数放大器的形式,五级双反馈回路结构,实现低功耗。为了防止负载电流触发进入饱和区,速度增益单元结构的叠加电流触发连接到NMOS管随着负载的方法。测试结果表明,该电路具有功耗性能好(1 mW)同时56.8 dB / m的敏感度。本文通过分析当前的触发系统的分析和比较现有的可变增益放大器,可变增益放大器结构组成的折叠无线传感单元和控制单元采用指数。为了减少电路的功耗,提高输出摆动,结构的两级折叠无线传感器单元股票控制电压和电流强度提出了电路的一部分。针对系统的设计要求,本文详细讨论了整个温度测量节点的体系结构和芯片的设计参数,完成了芯片的整体架构设计。仿真结果的稳态温升电热场表明,该电路实现了输入动态调整范围超过60分贝,最大功耗1兆瓦,线性误差小于0.5分贝。设计的自动增益控制电路是在中芯国际0.18角CMOS工艺实现的。 The simulation results of the steady-state temperature rise of the electric heating field show that the circuit has a 56 dB input dynamic adjustment range within a linear error of 1.25 dB, and the time constant is 7.55 ms, and power consumption is 2.84 mW. Through the steady-state temperature rise simulation and test results of the electric heating field, the correctness of the design is verified and it meets the system requirements. SN - 1687-725X UR - https://doi.org/10.1155/2021/8359504 DO - 10.1155/2021/8359504 JF - Journal of Sensors PB - Hindawi KW - ER -