TY -的A2 -侯,彭AU - Lei,人非盟——见鬼,Fa-Ning盟——雪,海滨盟兴,金盟——丁Weihua PY - 2022 DA - 2022/05/11 TI -研究文中对纳米压痕技术的测试效果测试方法在微机械性能的花岗岩矿物SP - 5834979六世- 2022 AB -矿物的微观力学性能研究是揭示岩石的破坏机理具有重要意义,可以为建筑材料的无损检测提供重要依据和辅助岩石破碎技术。作为主要为岩石和矿物微观力学性能测试方法,nanoindentation测试有几个参数,比如加载时间,压痕深度,和加载速率对测试结果有很大的影响。三个方案设计如下:(1)装卸率保持不变,和保持时间是0年代,5 s, 10年代,20多岁,50年代和100年代,分别。(2)10个周期的装卸测试是用来计算微机械指标在不同压痕深度。(3)最大负载和保持时间保持不变,和加载速率是5 mN / s, 10 mN / s, 20 mN / s, 30 mN / s, 40 mN / s,分别和50 mN / s。结果表明,(1)与保持时间的增加,弹性模量和硬度的长石0和5之间的大幅减少,5和10年代之间略有降低,稳定十年代后。的蠕变位移长石与保持时间呈正相关。不改变占用时间蠕变位移的发展道路。(2)与压痕深度的增加,长石的弹性模量和硬度逐渐降低,成为稳定当压痕深度超过350海里。(3)弹性模量与加载速率和石英的硬度增加。 The maximum indentation depth and residual indentation depth decrease with the increase of loading rate. The creep displacement increases with loading rate, while the creep compliance decreases with the increase of loading rate. With the increase of holding time, the creep rate decreases and tends to be stable. The results provide theoretical basis for obtaining more accurate rock nanoindentation mechanical properties and revealing rock damage mechanism. SN - 1468-8115 UR - https://doi.org/10.1155/2022/5834979 DO - 10.1155/2022/5834979 JF - Geofluids PB - Hindawi KW - ER -